Knowledgebase: Troubleshooting
iCheck - Installation and parameter checker
Posted by Squarell Technology on 10 November 2014 05:32 PM

With the iCheck software you can quickly check if your CANbus installation is done correctly and what parameters are read by the Squarell device.

 

IMPORTANT:
iCheck is a stand-alone program that, once installed, can be used offline. Therefor you don’t need a user account or internet connection. The only thing you need is a RS232 connection to your PC and a DCF that supports iCheck installed to your Squarell device. All standard Squarell DCF’s like SQU-8000-XXXX-000000-yymmddCL.dcf support iCheck. Contact your account manager or the Squarell Support Portal (http://support.squarell.com) to find out your customer specific DCF supports iCheck.



Attachments 
 
 icheck manual 180712.pdf (929.00 KB)
 squarell_icheck_setup_1.3.4.exe (915.63 KB)