Knowledgebase: Device configuration
How can I change threshold values for FMS4 parameters?
Posted by Squarell Technology on 25 October 2013 10:17 AM

Starting from the DCF (software) version 130215 it’s possible to change the thresholds by sending a RS232 message to the Flex or Solid device. The changing of the thresholds is documented in the RS232 protocol description.


For all other older types of devices (66xx series) and Flex or Solid DCF (software) versions prior to 130215, you’ll need to modify the DCF (software) using iConfigure.  The changing of the thresholds is also documented in the RS232 protocol description.


Comments (0)